WH-EM-PNC
Op voorraad
43
EDP
48347004
Familie
WH-EM-PNC
Afmeting
Categorie
Taps
Omschrijving
WH-EM-PNC Thread milling without pre-drilled hole WXS coating Left-hand (spindle rotation left) Direction of tool feed: right 4 flutes, strong & negative rake angle
Levertijd
Volgende dag geleverd
(bestel voor 16:00 uur)
In winkelwagentje
Materiaal
Specificaties
DCON (Ød)
6
Draadafmeting
4
Spoed
0,7
LU/LH/APMX (l)
9,9
LF/OAL (L)
50
LU/LCF (l1)
14,2
ZEFP (ZΔ)
4
DN (d1)
2,18
Aanbevolen pilot boor
There is no Drill for this Tap.
Thread Pro
Generating codes for complex machining couldn’t be easier with ThreadPro, which has eliminated the hassle of having to “enter data as text, copy and replace.” The configuration of multiple paths, which was not adjustable before, has been greatly simplified to enable the easy creation of zero cut programs. In addition to multiple feed (machining at each cutting edge length), single feed (1 pitch per cut) is also available, which is ideal for machining high hardness materials. Last but not least, with the capability to review machining trajectory, trouble-free tool movement can be confirmed to minimize tool damage. The new ThreadPro is available in 12 different languages and supports eight NC programming languages. The software incorporates “RPRG” value to reduce setup, machining time and achieve stable tool life.
