WX-PNC
Op voorraad
5
EDP
3900365
Familie
WX-PNC
Afmeting
D8,8 UN14x 8,8
Categorie
Taps
Omschrijving
UN Higher speed due to spiral Threaded LG 2 x D d1 = min. hole diameter For use with standard collet chuck For making thread until bottom of blind hole For internal thread to left and right.
Levertijd
Volgende dag geleverd
(bestel voor 16:00 uur)
Materiaal
Specificaties
DC (ØD)
8,8
DCON (Ød)
10
Draadafmeting
7/16
Spoed
14
LU/LH/APMX (l)
18,1
LF/OAL (L)
75
LU/LCF (l1)
19,9
ZEFP (ZΔ)
3
Type
1
Aanbevolen pilot boor
There is no Drill for this Tap.
Thread Pro
Generating codes for complex machining couldn’t be easier with ThreadPro, which has eliminated the hassle of having to “enter data as text, copy and replace.” The configuration of multiple paths, which was not adjustable before, has been greatly simplified to enable the easy creation of zero cut programs. In addition to multiple feed (machining at each cutting edge length), single feed (1 pitch per cut) is also available, which is ideal for machining high hardness materials. Last but not least, with the capability to review machining trajectory, trouble-free tool movement can be confirmed to minimize tool damage. The new ThreadPro is available in 12 different languages and supports eight NC programming languages. The software incorporates “RPRG” value to reduce setup, machining time and achieve stable tool life.
