Gängtappar
Resultat 3468
Rekommenderas
Produkt familj
WH-VM-PNC
Storlek 2.4x1.5xP0.5-INT
Leveranstid
Leverans nästa vardag
(Vid order innan 16:00
)
Lager 23
Rekommenderas
Produkt familj
WH-VM-PNC
Storlek 3.1x2.1xP0.7-INT
Leveranstid
Leverans nästa vardag
(Vid order innan 16:00
)
Lager 34
Rekommenderas
Produkt familj
WH-VM-PNC
Storlek 4.0x2.4xP0.8-INT
Leveranstid
Leverans nästa vardag
(Vid order innan 16:00
)
Lager 21
Rekommenderas
Produkt familj
WH-VM-PNC
Storlek 3.2x2.4xUNJ32-INT
Leveranstid
Leverans nästa vardag
(Vid order innan 16:00
)
Lager 150
Rekommenderas
Produkt familj
WH55-OT
Storlek M3x0,5
Leveranstid
Leverans nästa vardag
(Vid order innan 16:00
)
Lager 28
Rekommenderas
Produkt familj
WH55-OT
Storlek M4x0,7
Leveranstid
Leverans nästa vardag
(Vid order innan 16:00
)
Lager 55
Rekommenderas
Produkt familj
WH55-OT
Storlek M5x0,8
Leveranstid
Leverans nästa vardag
(Vid order innan 16:00
)
Lager 32
Rekommenderas
Produkt familj
WH55-OT
Storlek M6x1
Leveranstid
Leverans nästa vardag
(Vid order innan 16:00
)
Lager 44
Rekommenderas
Produkt familj
WH55-OT
Storlek M8x1,25
Leveranstid
Leverans nästa vardag
(Vid order innan 16:00
)
Lager 104
Rekommenderas
Produkt familj
WH55-OT
Storlek M10x1,5
Leveranstid
Leverans nästa vardag
(Vid order innan 16:00
)
Lager 9
Thread Pro
Generating codes for complex machining couldn’t be easier with ThreadPro, which has eliminated the hassle of having to “enter data as text, copy and replace.” The configuration of multiple paths, which was not adjustable before, has been greatly simplified to enable the easy creation of zero cut programs. In addition to multiple feed (machining at each cutting edge length), single feed (1 pitch per cut) is also available, which is ideal for machining high hardness materials. Last but not least, with the capability to review machining trajectory, trouble-free tool movement can be confirmed to minimize tool damage. The new ThreadPro is available in 12 different languages and supports eight NC programming languages. The software incorporates “RPRG” value to reduce setup, machining time and achieve stable tool life.
