AT-2 R-SPEC
Stok
37
EDP
8331227
Grup
AT-2 R-SPEC
Boyut
2.4X7.5 P0.5-INT
Kategori
Taps
Açıklama
First choice in quality and performance Thread milling without pre-drilled hole DLC-IGUSS coating Left-hand (spindle rotation left) Direction of tool feed: right (clockwise) 2 flutes for large chip room. Coolant-through from M6.
Teslim Zamanı
Teslimatı bir sonraki iş günü
(sipariş saat 16:00'dan önce)
Sepete ekle
DXF
Malzeme
Özellikler
DC (ØD)
2,4
DCON (Ød)
6
Diş Ölçüsü
3
Hatve
0,5
LF/OAL (L)
50
ZEFP (ZΔ)
2
DRVS (a)
9,25
Type
1
Tavsiye edilen pilot matkap
There is no Drill for this Tap.
Thread Pro
Generating codes for complex machining couldn’t be easier with ThreadPro, which has eliminated the hassle of having to “enter data as text, copy and replace.” The configuration of multiple paths, which was not adjustable before, has been greatly simplified to enable the easy creation of zero cut programs. In addition to multiple feed (machining at each cutting edge length), single feed (1 pitch per cut) is also available, which is ideal for machining high hardness materials. Last but not least, with the capability to review machining trajectory, trouble-free tool movement can be confirmed to minimize tool damage. The new ThreadPro is available in 12 different languages and supports eight NC programming languages. The software incorporates “RPRG” value to reduce setup, machining time and achieve stable tool life.
